{"id":1921,"date":"2015-03-20T00:00:43","date_gmt":"2015-03-20T07:00:43","guid":{"rendered":"http:\/\/192.168.3.4\/?p=1921"},"modified":"2018-01-09T06:49:48","modified_gmt":"2018-01-09T14:49:48","slug":"musings","status":"publish","type":"post","link":"https:\/\/www.cloudacm.com\/?p=1921","title":{"rendered":"Spring Heartbreak"},"content":{"rendered":"

RPi Dashcam<\/span><\/strong><\/p>\n

Here’s a step by step<\/a> using raspivid, super simple.<\/p>\n

RPi Bluetooth and WiFi <\/span><\/strong><\/p>\n

I found it much easier to just use a USB adapter Edimax EW-7811Un, these instructions<\/a> make it look easier than what I experienced with Adafruits “Ourlink” adapters.\u00a0 I think my new AP doesn’t support the Ourlink band, so I had a sourlink.<\/p>\n

Here’s one from Plugable<\/a>.<\/p>\n

BLE Revisited<\/span><\/strong><\/p>\n

Bluetooth basic tutorial<\/a> – from Sparkfun<\/p>\n

BC118 BLE Mate 2 Hookup Guide<\/a> – from Sparkfun…don’t get too excited…it has a limit that only allows it to comm with another matching unit…”you won\u2019t be able to easily connect it to any other BLE modules other than another BC118″<\/p>\n

Old School Bluetooth<\/span><\/strong><\/p>\n

Configuring The HC-05 Bluetooth Module with AT Commands – techbitar<\/a><\/p>\n

Bluetooth HC 05 & HC 06 in Command Mode & searching & Pairing Discoverable devices – Committed to Excellence<\/a><\/p>\n

Arduino Bluetooth Basics – tinkernutremix<\/a><\/p>\n

HC-06 (JY-MCU) Bluetooth Serial Module: Wiring and getting started\u00a0 – David Watts<\/a><\/p>\n

Innogear HC-05 Wireless Bluetooth Host Serial Transceiver Module Slave and Master RS232 For Arduino – Amazon<\/a><\/p>\n

Some other ideas<\/span><\/strong><\/p>\n

What the Future Sounded Like <\/a>– Documentary from BBC<\/p>\n

Previous Post Subject: TFT LCD and NearIR Camera Modules on the RPi<\/p>\n

This post we will cover input and output hardware.\u00a0 The PiTFT LCD<\/a> output device will be used to display the near infrared camera<\/a> input.\u00a0 We’ll cover how to uplink to Dropbox<\/a>.\u00a0 This will be a lead in for augmented reality in later posts.\u00a0 The PiTFT<\/a> will require software to setup, here are the steps.<\/p>\n

RPi Temp Monitor<\/a><\/p>\n

This worked.<\/a><\/p>\n

This is cool.<\/a><\/p>\n

Waveshare Night Vision Camera Light Sense IR LED Board for Raspberry Pi<\/a><\/p>\n

Adafruit PiTFT – 2.8″ Touchscreen Display for Raspberry Pi<\/a><\/p>\n

article to chronicle my experiences with the Pi camera<\/a><\/p>\n

Raspberry Pi – USB Webcam <\/a><\/p>\n

Displaying webcam video on Raspberry Pi using pygame (This is key)<\/a><\/p>\n

SnapPiCam Raspberry Pi Camera<\/a><\/p>\n

Slimline point-and-shoot camera from Ben Heck<\/a><\/p>\n

Ben Heck’s Raspberry Pi Point and Shoot Camera<\/a><\/p>\n

ContractorWolf.com Raspberry Pi \u2013 Point & Shoot Camera<\/a><\/p>\n

http:\/\/www.crummy.com\/software\/BeautifulSoup\/bs4\/doc\/<\/a><\/p>\n

Documentation on the uses of Beautiful Soup to scrape web content for values.<\/p>\n

http:\/\/w1.weather.gov\/obhistory\/KSEA.html<\/a><\/p>\n

http:\/\/airquality.weather.gov\/probe_aq_data.php?latitude=47.44899&longitude=-122.30929<\/a><\/p>\n

These were a couple of sources that had data worth graphing in Cacti<\/p>\n

http:\/\/xmorph.sourceforge.net\/<\/p>\n

http:\/\/manpages.ubuntu.com\/manpages\/gutsy\/man1\/xmorph.1.html<\/p>\n

http:\/\/www.imagemagick.org\/script\/index.php<\/p>\n

aPress 1590595904
\napt-get install xmorph
\n48 days
\n6 posts
\nArduino, Xbee, RPi
\nimagemagick (image processing)
\nffmpeg (video generation)
\nopencv (video processing)
\nyoutube uploading
\nthingspeak
\nhttp:\/\/electronut.in\/dht11-rpi-cloud-plot\/<\/p>\n

Stuff carried over
\nFFT and Sound processing
\nSyslog, Thold, and email notifications
\nComplex multi line batch processing with python
\nYour RPi book
\nSpell check your blog
\nImage mosaics and morphing
\nDepth and FLIR imaging<\/p>\n

You might be on edge, but don’t jump the gun.<\/strong><\/span><\/p>\n